Harlequin Hi-Shine blue vinyl roll

• Thickness – 1.5mm
• Width – 1.5m
• Roll length – 20m
• Floor area – 22.5m²
• Weight unpacked – 20m – 58kg
• Installation method – for loose lay installation with double sided tape.
• Weight – 1.96kg/m²
• Fire rating – Bfl-s1 (EN 13501-1)

• television set flooring
• music video flooring
• pop concert flooring
• award ceremony flooring
• fashion catwalk flooring
• exhibition flooring
• product launch flooring
• comedy show flooring
• theatrical show flooring
• operatic performance flooring
• window display flooring
• broadcast flooring

What tape do I use to install Harlequin Hi-Shine vinyl?

Harlequin Double-Sided Tape is recommended when taping the underside of the floor to a sub-floor. The high-tack/low-tack tape is a safe and secure option for working with temporary applications. Carefully remove tape by gently pulling up and working parallel to the floor. Top-taping of Hi-Shine is not recommended because removal of the tape could damage the surface of the floor.

How do I store my roll of Harlequin Hi-Shine?

When storing, always keep your floor firmly wound onto the cardboard core from the original packaging. This helps to prevent the floor from being flattened or dented and makes handling easier. If the original cardboard cores are no longer available use a PVC pipe with a minimum diameter of 8cm. Roll the floor as tightly as possible before storage.

Never wind up the rolls without a core inside and never store them horizontally on top of each other with no core to support them as this will cause them to flatten resulting in stubborn or permanent ripples. If you do have to store the rolls flat make sure that they are not stacked more than two rolls high and do not lay heavy objects on top.

Ensure that any furniture placed on the floor has feet that will not damage the floor; take caution when moving heavy objects such as stage equipment.

How should I clean my Harlequin Hi-Shine vinyl?

Sweep daily to remove dirt, dust & debris. Any marks on the floor can be removed with a diluted solution of Harlequin Vinyl Daily Cleaner in the ratio of 1:200 (5ml of Harlequin Vinyl Daily Cleaner in 1 litre of water).  Detailed cleaning instructions available here.

How much does a roll of Harlequin Hi-Shine cost?

Prices vary, depending on roll length and colour. Standard roll lengths apply.

How long will it last?

The expected longevity of the vinyl is dependent upon the use and the care and maintenance. Harlequin Hi-Shine has been used on many professional tours and productions.

Can I permanently install Hi-Shine?

It is not recommended as a permanent flooring. If you want to glue the Hi-Shine we would recommend using a F-Balls, F46 a pressure sensitive adhesive to do a full stick. You would use a 1.5mm notch trowel and then roller the adhesive, let the adhesive turn from clear to opaque like you would normally, then lay the vinyl. This will eliminate any foot prints showing in the adhesive. You do have to be very careful, If the floor is walked before adhesive is properly cured you could get foot prints show through it as well as any tiny lumps and bumps.

Can I wear Stilettos on Harlequin Hi-Shine?

Stiletto heels should be avoided if they have very sharp edges.

What is your delivery service and can I get it on a Next Day service?

Our standard delivery service is 2-3 working days.

Harlequin makes every effort to have your order of flooring delivered in a safe manner and in the best of condition. As a result, your order will only be delivered by a Harlequin approved company. On the day of delivery, please make sure that someone is present to accept the delivery. Delivery of heavy palletised products, such as flooring is to the nearest kerbside. Our flooring products are generally large and heavy, so please ensure that necessary arrangements are in place on the day of delivery. Experience suggests that 2 people will be required to handle the delivery.

Will I receive a VAT invoice and when will I get this?

Yes, this is sent after your products have been despatched.